Skip to product information
1 of 1

G&B Fermzilla 27L Gen 3 - Ultimate Fermenter Kit

G&B Fermzilla 27L Gen 3 - Ultimate Fermenter Kit

No reviews

Regular price $1,009.00
Regular price Sale price $1,009.00
Sale Sold out
Tax included. Shipping calculated at checkout.

G&B Fermzilla 27L Gen 3 - Ultimate Fermenter Kit

We've taken the new Fermzilla 27L Gen 3 and hand selected some extra products that we know you need to get started with pressure fermenting. Pressure fermenting will not only give you a better quality product but it can also help reduce your fermentation time. Get Yours Today!  

With this kit you will have the ability to Pressure Ferment your brew, Remotely Access your Gravity (No more samples needed), Dry hop and Keg your brew while still maintaining pressure. You will also be able to Regulate the Temperature with the Thermowell, Dual Temperature Controller, Heat Belt and Cooling Coil. Please note that the Cooling Coil will need to be attached to a glycol chiller or other liquid cooler. Cold Water can be used but is less effective. 

All of these things will help you achieve the best quality product you can possibly create! 

What's Included

Fermzilla 27L - Gen 3 x1

Fermzilla Plastic Pressure Kit x1

Fermzilla BlowTie Complete Kit (Diaphragm Spunding Valve) x1

Fermzilla Hop Bong Kit x1

Fermzilla Cooling/Heating Coil x1

Mangrove Jacks Heat Belt x1

60cm Thermowell - 1/4" Duotight x1

RAPT Dual Temperature Controller x1

RAPT Pill - Hydrometer & Thermometer (Wifi & Bluetooth) x1

MJ Portable Co2 Mini Regulator x1

Gas Ball Lock Disconnect MFL Thread x1

Beer Ball Lock Disconnect MFL Thread x2 - For Keg Transfer Line

Duotight - 8mm for MFL Connector x2 - For Keg Transfer Line

5mm Tubing - Per Meter x1 - For Keg Transfer Line

19L AMCYL Keg x1

FermZilla 27L - Generation 3.0

Introducing the Gen3 FermZilla Tri-Conical. Now with 3 Inch Tri-Clover ferrule molded into the tank and redesigned tri-clover dump valve. This unit was born from customer feedback received on the Gen2 Model. No more complicated dump valve designs here, just simplicity. Brew with confidence on the new Tri-Clover FermZilla Range.

The new FermZilla is a revolution in home brewing allowing home brewers and small micro-breweries a level of control that meets everyone's budget. With the FermZilla you have many of the benefits of a much more expensive stainless conical fermenter but with the additional benefit of being able to see the fermentation process in action and also ferment at pressures up to 2.4bar.
This is an incredible product at an extremely attractive price point in all the different sizes and models.

The FermZilla 27L Tri-Conical can be used in the following ways:

  • Basic Gravity Fermenter - New Brewers
  • Pressure Brewing Kit - Most Popular
  • Hop Bong Pressure Kit - For Intermediate Brewers
  • Glycol Twister Pressure Brewing Kit - Glycol Obsessed

What's new the difference between Gen2 and Gen3?
1. Molded 3 inch tri-clamp ferrule in the body of the FermZilla tank
2. 3 inch to 2 inch tri-clamp butterfly valve
3. 2 inch tri-clamp compatible collection container

Is it easier to clean / take apart than the Gen2?
YES, It is by far the easiest Conical PET fermenter to disassemble and clean into all the nooks and crannies. Simply release all pressure inside the vessel and detatch the tri clover clamps.

What does the starter kit come with?
      1 x 27L Conical FermZilla Tri-Conical Base Kit (unassembled)
      1 x 27L Gen3 Tri-Conical Tank with metal neck ring
      1 x Standard Top Lid, with Red PRV (35psi) [2 x Male PCO1881 Cap Threads] [Up to 4 drill ports for accessories]
      1 x Collar Lid Ring
      1 x Grommet PCO1881 Black Cap + 1 x Blank PCO1881 Black Cap for lid
      1 x Premium 3 Piece Airlock
      1 x 3 inch tri clover to 2 inch tri clover Butterfly Valve
      1 x 1000mL Collection Container & Lid* [2 x Male Cap Threads]
      2 x Blank PCO1881 Black Cap
      1 x Brewbuilt Flex Container lid with 2 inch tri-clover ferrule.
      1 x 3 piece ~ 3 inch tri clover clamp [+ 1 x 3" Beaded Silicone Seal]
      1 x 2 piece ~ 2 inch tri clover clamp [+ 1 x 2" Beaded Silicone Seal]
      1 x Stainless Stand with swing handles
      1 x Stainless Steel Handle Assembly
      1 x Strip Stick On Thermometer
      1 x Level indicator sticker (Litres and Gallons)
      1 x Spare Lid O-Ring
      1 x Spare Collection Container O-Ring

Warnings:
Please read the instructions thoroughly before use.

  • Keeping the units out of direct sunlight is a must for all PET fermenters. Sunlight degrades PET.
  • Do not expose to temperatures exceeding 35?C and pressure ferment past 5psi at these temperatures.

Please note:
When using this vessel under pressure. You must perform a water pressure check to ensure your connections are leak proof before you fill the fermenter every time. To do this. Fill your FermZilla up with some water, then apply a minimum of 15psi pressure to the vessel. Check for leaks around all Cap / Threads by tipping it upside down, in all directions where there are risks of leakage. 

Occasionally these units may come with some small indentations/dimples/dents from shipping, this is just a reality of shipping large blow-moulded thin-walled vessels. But don't panic, these fermenters are designed to endure minor deformations such as this. This was a necessary implementation into the design so that they can withstand some accidental suction from cold crashing and rough handling in transit without compromising their integrity and ability to endure high pressures. All small dents will push out and settle with use and positive pressure and are only an issue and warrant replacement in the rare event they start to show white stress patterns or have damaged the plastic.

View full details

Additional Details

Shipping & Delivery

In Stock Quantities Online may vary due to in store sales. Online quantities are pulled from all of our branches stock levels.

  • We will do our best to fulfil your order. If your order cannot be filled promptly you will be refunded via method of purchase or contacted to arrange alternate options.

We will only deliver to a New Zealand address at this point in time. We don’t deliver to PO Boxes.

Pickup orders may show available in store on the product page but may not be available in the quantities in your cart. You may have to adjust the quantities in your cart at checkout to be able to pick up at a specific store.

  • Pickup Orders are confirmed once checked by staff at location of pickup. Please wait to be contacted by staff before coming to store. 

Photo ID Of Person Who's Name is On The Order Must Be Presented to staff when picking up and must match name on order. We do not accept name changes of orders once placed so please make sure you are filling in the correct details. 

If goods are Not Received within 7 days of purchase, contact us.

Any Damaged or Missing Items from your order must be brought to our attention within 7 days of receiving your order.

If your item is Oversized or More Than 25kg you may be contacted for an additional freight charge to be calculated upon picking of order. 

We use Courier Post as our freight provider. Prices and providers are subject to change without prior notice.

To ensure successful delivery make sure there is some one Present at the Delivery Address during business hours.

Delivery times are normally 1-2 days to the North Island and 2-5 days to the South island once dispatched. Rural delivery can take an extra day longer.

In Stock Quantities Online my vary due to in store sales. We will do our best to fulfil your order promptly. If your order cannot be filled promptly you will be refunded or contacted to arrange alternate options.